Created by Thom Surprenant. Soft, flexible 3D foam latex prosthetic nose.
latex prosthetics are basically a 1 time use. If you are very careful,
use a lot or remover and take your time you may be able to get multiple
uses out of it. Each time you remove the prosthetic you loose part of
the blending edge. If you reuse, clean the adhesive off the prosthetic
with remover and let it airdry for 24 hours to let the remover
dissipate. Then powder it, place in a zip lock bag and store away from
We suggest applying with Pros-aide or Pro Adhesive which
is a professional adhesive that will keep the prosthetic on until you
take it off. Spirit gum should not be used. Spirit gum is made from
resin and it eventually will crack and the piece will start to fall off.
Paint with PAX Paint, water activated makeup, rubber mask grease paint, or airbrush.